Product center

undefined
undefined
undefined
+
  • undefined
  • undefined
  • undefined

OM.IED-3160 Digital Remote Metering and Monitoring

Intelligent GIS Monitoring Product Series

Product consultation:

  • 产品描述
    • Commodity name: OM.IED-3160 Digital Remote Metering and Monitoring

    Product Overview
    An intelligent monitoring instrument that integrates on-site monitoring of primary substation equipment status with digital data transmission capabilities, including: an SF₆ digital density meter, a surge arrester digital leakage current meter, a transformer digital oil thermometer, a transformer digital oil level gauge, a transformer digital gas relay, and a current/voltage transformer digital oil pressure gauge. These digital remote-transmission meters, paired with multi-port hubs and digital meter monitoring terminals, enable seamless uploading of collected monitoring data.


    System Architecture


    Introduction to the Digital Meter Monitoring Terminal
    Real-time acquisition of remotely transmitted digital meter data (such as SF₆ density, oil temperature, temperature levels, and surge arrester leakage current), with point-to-point transmission to a locally configured hub. The data is then aggregated at the hub before being sent to the digital meter monitoring terminal, which uses the DL/T 860 protocol to integrate and forward the information to the integrated application server.


    System parameters

    Equipment

    Detailed description

    CPU

    NXP i.MX6ULL

    ARM Cortex-A7 792MHz

    Memory Configuration

    NAND Version: DDR3 256MB, NAND Flash 256MB

    eMMC version: DDR3 512MB, eMMC 4GB

    Ethernet

    2-port, 10/100Mbps, with operating status indicator light

    Isolation Protection Design, ESD Level 3

    4G

    Supports standard SIM cards

    Supports PCIE interface, Quectel EC200S (Cat.1, without GPS and voice features)

    4G module; Network standards: China Mobile 4G/3G/2G, China Unicom 4G/3G/2G, China Telecom 4G

    WiFi

    Supports PCIE interface BL-M8723BU and BL-M8723DU Wi-Fi modules

    LoRa

    Channel 1, 433 MHz, supports two transmission power levels: 20 dBm and 30 dBm.

    Supported LoRa models: E32 (433T20DC) 20 dBm and E22 (400T30D) 30 dBm

    RS485

    4-way, with signal indicator lights

    1.5kV isolation protection, ESD Level 4

    TF card

    Route 1

    RTC

    Route 1

    Buzzer

    Route 1

    Reset button

    1 unit, used for system reset

    Boot Button

    1 unit, used in conjunction with the reset button for system firmware updates.

    Power-loss protection

    The CPU detected an external power failure, but the supercapacitor can continue providing power for 30 seconds.

    Power supply

    Main power input: DC 12V, with support for wide-voltage input ranging from DC 9V to 36V.

    Features reverse polarity protection and overcurrent protection.

     

    Work environment

    Humidity: 5%–95%, condensation-free

    Operating temperature: -25°C to 85°C (eMMC version)

    -40°C to 85°C (NAND version)

    Storage temperature: -40°C to 85°C

    Installation method

    1U standard rack-mountable/wall-mountable

    Number of accessible items

    100 meters

     

    On-site Case

     
    State Grid Zhuzhou Chengjia (Baiguan) 220kV Smart Energy Station   State Grid Ningxia 750kV Qixiang Substation

     

Product inquiry

Related products